
Cup&Vane Wind Sensor
SS101-02P1
Pendulum Wind Speed Sensor
Product Highlights
• Non-contact magnetic sensing measurement principle.
• Built-in high-performance sensor for accurate and reliable data collection.
• Low starting wind speed and wide measurement range.
• All-metal casing with corrosion resistance and strong wind resistance.
• Fault-tolerant circuit protection helps prevent damage from wrong wiring.
• CE EMC compliance, multi-level lightning protection and surge protection are stated in the source material.
• Built-in high-performance sensor for accurate and reliable data collection.
• Low starting wind speed and wide measurement range.
• All-metal casing with corrosion resistance and strong wind resistance.
• Fault-tolerant circuit protection helps prevent damage from wrong wiring.
• CE EMC compliance, multi-level lightning protection and surge protection are stated in the source material.
Product Overview
The SpeSense SS101-02P1 Pendulum Wind Speed Sensor is designed for wind speed monitoring using a pendulum-type sensing configuration. It can be considered for meteorological monitoring, industrial wind measurement and environmental sensing systems where the corresponding pendulum sensor design meets installation and measurement requirements. Its application-specific configuration provides an alternative to conventional cup-type wind sensors for suitable monitoring installations.
| Item | Specification |
| Operating voltage | 12–30 VDC; 5 V / 24 V pulse |
| Measuring range | 0–50 m/s; 0–30 m/s |
| Start wind speed | ≥0.5 m/s |
| Wind resistance | >70 m/s for 30 min |
| Accuracy | ±0.5 m/s (<5 m/s); ±3%FS (≥5 m/s) |
| Protection level | IP65 |
| Operating temperature | −20°C to +85°C |
| Electrostatic protection | 15 kV |
| Working humidity | 0%–95% RH, non-condensing |
| Output signal | 4–20 mA; 0–5 VDC; 0–10 VDC; pulse; RS485 (Modbus) |
| Main material | Aluminum alloy / polyester coating |
| Measurement principle | Non-contact magnetic sensing |









