
COD sensor
SS306-01-N01
Self-Cleaning COD Transmitter
Product Highlights
● Reagent-free dual-wavelength UV absorption.
● Integrated self-cleaning against biofouling.
● Automatic turbidity and temperature compensation.
● Wide 9–30 VDC supply and configurable RS485 communication.
● Integrated self-cleaning against biofouling.
● Automatic turbidity and temperature compensation.
● Wide 9–30 VDC supply and configurable RS485 communication.
Product Overview
The SpeSense SS306-01-N01 Self-Cleaning COD Transmitter is designed for continuous chemical oxygen demand monitoring in wastewater and industrial water systems. Its dual-wavelength ultraviolet absorption method supports reagent-free COD measurement, with turbidity and temperature compensation to help account for changes in sample conditions. The integrated self-cleaning mechanism helps reduce sensor surface fouling during long-term deployment. RS485 communication supports integration with compatible PLCs, industrial controllers and online water quality monitoring networks.
| Item | Specification |
| Power Supply | DC 9–30 V |
| Typical Power Consumption | ≤0.8 W normal; ≤1.5 W during self-cleaning |
| Communication Interface | RS485; standard Modbus-RTU protocol |
| Baud Rate | 4800 bit/s default; 1200–115200 bit/s configurable |
| Measurement Principle | Dual-wavelength ultraviolet absorption |
| COD Measurement Range | 0–500 mg/L equiv. KHP |
| Turbidity Measurement Range | 0–200 NTU |
| Measured Channels | COD, turbidity and temperature; TOC register available |
| COD Measurement Accuracy | ±5% FS equiv. KHP at 25 °C |
| Turbidity Accuracy | ±5% FS at 25 °C |
| COD Resolution | 0.1 mg/L |
| Turbidity Resolution | 0.1 NTU |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.5 °C |
| Repeatability | ±1% FS equiv. KHP at 25 °C |
| Response Time | ≤20 s |
| Operating Conditions | 0–40 °C |
| Ingress Protection | IP68 |
| Flow Velocity | <3 m/s |
| Probe Pressure Resistance | <0.1 MPa |
| Cable Length | 5 m by default; custom length available |
| Housing Material | Corrosion-resistant plastic and stainless steel |
| Recommended Calibration / Maintenance | Every 3 months |
| Self-cleaning System Life | About 18 months; depends on cleaning frequency |









